HEZOOMS 8k DisplayPort Splitter 1 in 3 Out 8K@30Hz 4K@144Hz DP 1.4 Splitter Triple MST SST Hub Adapter 1×3 Port for 1…

Make sure this fits by entering your model number.
HEZOOMS NEW 1×3 DisplayPort Splitter: Split one DP signal into 3 signals. Supports output of 3 same screens in mirror mode or 3 different screens in MST mode. In MST expansion mode, the single port output can reach 8K@30Hz 4K@144Hz, and the three ports output can reach 4K@60Hz at the same time .MST mode of Apple system can only extend one screen (limited by iOS System) .when using, please make sure to use USB cable to power the Splitter switcher.Note :The product does not include a power adapter, 5V1A power adapter needs to be purchased by yourself.
This super slim 1×3 DP splitter is compact and efficient. It allows you to distribute one HD source to three displays simultaneously without any signal loss. The system is compatible with DP1.4、DP1.3、DP1.2、DP1.0, Support 3D and 4K、8K ultra HD, Support SST and MST. The integrated graphics device may have compatibility issues with the DP splitter due to video memory limitations and insufficient bit width. Please run it on the computer where the discrete graphics card is installed.
Support operating system: Apple (iOS) system, Windows system, Android system.pls make sure that the DP soure has already implemented full support for MST/SST. Splitter Support SST (Mirror) and MST (Extended) mode ,Support HDR 4:4:4, 4:2:2, 4:2:0. DP cable direct connections are recommended for reliability and compatibility. this Displayport MST SST splitter does not work with any dock.The length of the DP cables connected to both ends of the Splitter should not exceed 3 meters respectively.
DisplayPort Splitter Specifications: Single port display(8K@ 30Hz 7680×4320 ) ,Single port display (4K@ 144Hz 3840×2160),1 to 3 operation supports 4K@60Hz image.Compatible resolution: 8K@30Hz 4K@144Hz, 120Hz, 60Hz 1440P@165Hz, 144Hz, 120Hz, 60Hz 1080P@240Hz, 165Hz, 144Hz, 120Hz, 60Hz (Depends on your graphics card, monitor, operating system and DP cable support).If you output an 8K signal, we recommend using an DP 1.4 8K standard cable.
Note :If you would like to output 8K@30Hz , 4K@144Hz via our splitter in your displays,please make sure your source devices,your cable and your monitors can all support the resolution and refresh rate you need to output. And used under a single port. Notice :The LED of DisplayPort splitter will not light up when connect with the power supply. This is normal and the splitter is not broken. The LED of splitter will only light up while connect with the computer host and monitor and also detected the signal come in. This is a DisplayPort Splitter, not an HDMI splitter, and HDMI ports and cables do not work with it.